B40pro Brewing System

B40pro is a brewing system without compromise. Built for enthusiasts.

- 46-liter (12 gal) tank volume and 9kg (20 lb) malt capacity.
- 20-40 liter (5-11 gal) pre-boil volume for flexibility
- 3,2kW heating power makes heating and boiling fast.
- High accuracy with 2 digital sensors.
- Conical bottom with center draining for fast and easy cleaning.
- Powerful control system with 7″ touch-screen, Wifi and Bluetooth 4.2.

NO/EU 220-240V: 3200W combined power on one power input. Schuko (EU) power plug
USA 240V: 3200W combined power on one power input: NEMA 6-20 power plug
USA 115V: 3200W combined power from two power inputs: NEMA 5-15 power plug (2 cables)

Download the latest user manual here.

€ 1,413.57
  • NO/EU 220-240V
  • USA 240V
  • USA 115V
Out of stock. Expected back in stock early March

The B40pro has an 40 liter (10 gal) boil capacity and about 9kg (20 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full.

The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting.

Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess.

After brewing with the B40pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals.

The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right.

With powerful heating elements combining over 3,2kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse.

All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone.

The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi.

 54 (h) x 50 (w) x 50 (d) cm (size with flanges only)
Weight: 20 kg (24 kg with packaging and included accessories)
Tank volume: Ø40 cm, Height 36cm
Volume: 46 liters / 12 gal (recommended max boil volume – 40l / 10 gal)
Malt capacity: 9 kg (25 l)
Material: 1.0mm stainless steel (SS304)
Heating elements: 230V, 3200W (2x1600W)
Pump: 24V brushless, Max 25 l/min, stainless steel head, touch controlled
Control unit: ARM Cortex M4 180mhz, 7″ Touch 800×480
Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD
Tubing: 16x25mm Silicon, food grade

What's included:

– Complete brewing system with controller, pump, tank sensor, heaters and lid
– Malt pipe with handle and latches
– 1 pcs expanded metal filter
– 1 pcs 3-way valve
– Temperature sensor with adapter for pump line
– 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup)
– 3 pcs 34mm TC blind caps
– 1 pcs dip tube, short type
– 1 pcs mash hat for spreading the wort
– 1 pcs sparge tube
– 150cm 16x25mm silicone tube
– 1 pcs 34mm TC to 19mm hose barb adapter
– O-rings for the center pipe and dip tube
– 1 pcs Power Cable, 2 meter

Please note that some parts of our systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product.


Spesifikke referanser

Customers who bought this product also bought:
Paddle Paddle
View more
Paddle made from high quality SS304 steel. The paddle has a practical hook to hang it on the inside of the brewing tank.We've also milled a cylinder on the end of the handle, which makes it possible to use as a...
Quick view
Trisodium phosphate, 100g
View more
TSP - Trisodium phosphate is a cleaning agent that works well in removing polishing oils and other residues from the production of steel products. Dosage: 5-10g/liter water. Leave for 30-60 minutes. Use protective...
Quick view
Dip tube, short
View more
Dip tube, short model. Using O-rings, you can adjust the angle of the dip tube.Fits the flange in both sides of the B40pro and B80pro.O-rings are sold separately.
Quick view
Sist vist
€ 1,413.57
B40pro is a brewing system without compromise. Built for enthusiasts.- 46-liter (12 gal) tank volume and 9kg (20 lb) malt capacity.- 20-40 liter (5-11 gal) pre-boil volume for flexibility- 3,2kW heating power makes...
3 other products in the same category:
B150pro Brewing System
View more
B150pro - our largest pro-series system, is a brewing system without compromise. Built for enthusiasts, nano breweries and brewpubs.- 170-liter (44 gal) tank volume and 35 kg (77 lb) malt capacity.- 6.6kW heating...
Quick view
B80pro Brewing System B80pro Brewing System
View more
B80pro is a brewing system without compromise. Built for enthusiasts.- 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity.- 30-80 liter (8-21 gal) pre-boil volume for flexibility- 6kW heating power (2x3kW)...
Quick view