B80pro Brewing System

B80pro is a brewing system without compromise. Built for enthusiasts.

- 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity.
- 30-80 liter (8-21 gal) pre-boil volume for flexibility
- 6kW heating power (2x3kW) utilizing two mains inputs makes heating and boiling fast.
- High accuracy with 2 digital sensors.
- Conical bottom with center draining for fast and easy cleaning.
- Powerful control system with 7″ touch-screen, Wifi and Bluetooth 4.2.

Versions:
NO/EU 220-240V: 6000W combined power on two power inputs. Schuko (EU) power plug (2 cables)
USA 240V: 6000W combined power on two power inputs: NEMA 6-20 power plug (2 cables)
USA 115V: 3200W combined power from two power inputs: NEMA 5-15 power plug (2 cables)

Download the latest user manual here.

$ 1,956.27
Version
  • NO/EU 220-240V
  • USA 240V
  • USA 115V
In stock for shipping within 1-2 days
Varenummer:
7711002
Beskrivelse

The B80pro has an 80 liter (21 gal) boil capacity and about 20kg (44 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full.

The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting.

Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess.

After brewing with the B40pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals.

The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right.

With powerful heating elements combining over 3,2kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse.

All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone.

The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi.


Dimensions: 
 64 (h) x 60 (w) x 60 (d) cm (size with flanges only)
Weight: 25,5 kg (30,5 kg with packaging and included accessories)
Tank volume: Ø50 cm, Height 46cm
Volume: 90 liters / 23 gal (recommended max boil volume – 80l / 21 gal)
Malt capacity: 20 kg (58 l)
Material: 1.0mm stainless steel (SS304)
Heating elements: 230V, 6000W (2x3000W). 115V version has 3200W total power.
Pump: 24V brushless, Max 25 l/min, stainless steel head, touch controlled
Control unit: ARM Cortex M4 180mhz, 7″ Touch 800×480
Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD
Tubing: 16x25mm Silicon, food grade

What's included:

– Complete brewing system with controller, pump, tank sensor, heaters and lid
– Malt pipe with handle and latches
– 1 pcs expanded metal filter
– 1 pcs 3-way valve
– Temperature sensor with adapter for pump line
– 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup)
– 3 pcs 34mm TC blind caps
– 1 pcs dip tube, short type
– 1 pcs mash hat for spreading the wort
– 1 pcs sparge tube
– 150cm 16x25mm silicone tube
– 1 pcs 34mm TC to 19mm hose barb adapter
– O-rings for the center pipe and dip tube
– 2 pcs Power Cable, 2 meter

Please note that some parts of our systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product.

Produktdetaljer
7711002

Spesifikke referanser

Customers who bought this product also bought:
Adjustable Dip Tube, TC34mm
View more
$69.81
The adjustable dip tube allows you to adjust the angle of the dip tube from outside the tank. Useful for adjusting the pump inlet dip tube and also for adjusting the whirlpool return dip tube, to optimize and...
Quick view
3-way valve, 34mm TC
View more
$92.27
Our valves are used to customize the system. All the valves have a T-type ball, which makes it close only the port opposite of the handle direction. All the ports on the valve are 34mm TC and they are made from high...
Quick view
B150pro Brewing System
View more
$2,795.07
B150pro - our largest pro-series system, is a brewing system without compromise. Built for enthusiasts, nano breweries and brewpubs.- 170-liter (44 gal) tank volume and 35 kg (77 lb) malt capacity.- 6.6kW heating...
Quick view
Silicone Grease, 1oz tube
View more
$7.36
Haynes Silicone Grease is used for lubrication of O-rings in valves and movable parts. Also used to lubricate surfaces to make silicone gaskets glide easily. The product is designed to lubricate the following...
Quick view
Sist vist
$ 1,956.27
B80pro is a brewing system without compromise. Built for enthusiasts.- 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity.- 30-80 liter (8-21 gal) pre-boil volume for flexibility- 6kW heating power (2x3kW)...
4 other products in the same category:
B80pro Brewing System B80pro Brewing System
View more
$1,760.64
B80pro is a brewing system without compromise. Built for enthusiasts.- 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity.- 30-80 liter (8-21 gal) pre-boil volume for flexibility- 6kW heating power (2x3kW)...
Quick view
B150pro Brewing System
View more
$2,515.56
B150pro - our largest pro-series system, is a brewing system without compromise. Built for enthusiasts, nano breweries and brewpubs.- 170-liter (44 gal) tank volume and 35 kg (77 lb) malt capacity.- 6.6kW heating...
Quick view
B40pro Brewing System B40pro Brewing System
View more
$1,425.12
B40pro is a brewing system without compromise. Built for enthusiasts.- 46-liter (12 gal) tank volume and 9kg (20 lb) malt capacity.- 20-40 liter (5-11 gal) pre-boil volume for flexibility- 3,2kW heating power makes...
Quick view

Menu

Kundemeny

Del